Manufacturer of High Quality Aluminum Windows

New commercial windows or window replacements are fabricated of a high quality aluminum and are tested to pass high performance standards to protect against air, water, temperature and structural integrity. We are among a few window manufacturers in New York that offer high rated, high thermal performance, low noise transmission, exterior glazed aluminum windows. Our replacement windows prices are hard to beat. We offer a large order discounts. All the windows manufactured are tested to the latest structural and thermal standards and come with premium hardware.

Aluminium Windows Manufacturer in NYC | New York, New Jersey
Aluminium windows, aluminium glass facade systems in Midtown Manhattan NYC

We produce windows that are:

  • Impact resistant. We offer a wide variety of window replacement options including aluminum storm windows, aluminum impact resistant window frames for all your commercial windows replacement needs.
  • Durable. Commercial aluminum window systems have frames that can withstand the pressure much better than older windows including aluminum windows. Aluminum is less likely to leak or corrode, compared to wooden or steel window frames. Aluminum windows are also less prone to deterioration, especially compared to wooden frames.
  • Cost-effective. Your savings depend on your energy needs, the size of your office, your current window system and other variables. To calculate an accurate estimate, consult an HVAC engineer. The equation includes the “U-value”; a measurement of heat transferred through a window — and the “R-value” — the ability of a window to resist heat flow.
  • Noise-reducing. While this benefit won’t save you money, it can save you and your employees stress. If your New York commercial windows look out over a busy street, airport or hospital, you’ll appreciate the value of noise-reducing double-paned glass and glass aluminum windows with a high Sound Transmission Class (STC) number. The higher the STC, the more sound it blocks.

Windows system W62 (W2.44) – best safety and energy saving

W62 (W2.44) system is a high insulating window system that meets all the requirements regarding thermal insulation, such as thermotechnical and sound-proofing requirements, great stability and security. This system with mounting depth of 62 mm (2,44 inches) and 70 mm for the sash (2,75 inches), designed for the manufacturing of window and translucent structures of different configurations and types. This makes it suitable for all types of building concepts, providing highest safety and reliability.

In W62 (W2.44) system, aluminium profiles are connected by fiberglass reinforced polyamide thermal break elements. This allows manufacturing units with perfect thermal insulation and great constructions static performance.

W62 (W2.44) is the most affordable and popular system for manufacturing of:

Tilt and Turn windows

  • Windows allowed to be operated as casement and hopper at the same time. Very convenient for security reason and water damage prevention.

Casement windows

  • Price saving option just casement operation.

Picture or fix windows

  • Great option for the additional lighting in the building without operational section. Conveniently glazed from inside and very easy to replace in case of the damage.

Multiple combination windows

  • Can meet any imagination to create multiple different layout and unlimited combinations.

Hopper windows

  • Very popular item that used in the commercial environment.

Awnings windows

  • Great option to be used with motor options for high reach areas.

French casement

  • Looking for big opening without any dividers in the middle after opening is the great option.

W62 (W2.44) window profiles allow manufacturing of:

  • double and single-window;
  • internal and external;
  • with basement profile and sash profile along the entire contour.

Carrier profiles of the system have three sizes for the width of the profile: from 27 mm (1.06 inch), 36 mm (1.42”) and 50 mm (1.96”). This allows to use materials rationally in the design of personal sizes units – from small windows to large glass windows. Create custom unit to meet requirement of the architect and invidual project. Take in consideration the location and potential wind pressure of the building ot project.

Also the system has condensate drainage system and ventilation. Holes for condensate drainage and ventilation are covered from the outside with plastic plugs. Corner joints are assembled with universal elements.

The use of the most advantage hardware allows to replace sash during operation without dismantling the product.

Single glass, double glazing or other filling as triple glazing up to 40 mm thick can be used as a fill in the units with W62 (W2.44) system.

SYSTEM DESCRIPTION

Profiles are made of AlMgSi 6060 alloy. This alloy is resistant to corrosion and allows to produce high-precision profiles. In combined profiles glass-filled polyamide thermo-insulating profiles are used. Excellent strength characteristics of the combined profiles are provided by modern technology of joining dissimilar materials.

Surfaces of profiles are protected from corrosion by means of a protective and decorative coating.

Color according to RAL scale (more than 200 colors are available), anodizing – 9 colors are available.

Moreover this product are granted to carry the label of Qualitycoat certification.

Sealing

EPDM rubber seals are used to seal the infill, sealing the middle part of the window design, ensuring condensate drainage and sealing connections of a shutter with a frame.

Fastening elements

Fasteners used to connect profiles, components and accessories are made of stainless steel.

Accessories

The system can be used with different popular types of hardware to meet custom requirement of the client. Just some of the hardware that we are using as Roto, Master, Fapim and other. We are aslo able to deliver custom product that can be made in house to meet you immagination.

Main product technical data (AAMA standarts)

Air infiltration – 0,1 L/s/m2
Sound transmision (1” Insulated glass) STC 34 OITC 29
U factor from 0.39 to 0.27 per sf or .088 to 1.28 per sqm
Water penetration resistance 12,0 psf
Wind load resistance Class A


Casement Single W62 Window
French Windows W62
Tilt and Turn single W62 W2.44 Window
Free Layout W62 Window
Cross Sut Custom Layout W62 Window

Planning And Design

Planning is the main key to success in any project. Project of any size both large or small require a very detailed review. If needed we will work closely with your architect to meet the design specifications and help to meet local requirements. Our engineers will review every detail from thermal requirements to sound specifications that back up by hardware that meet safety and security requirements in different areas of United States.

Our engineering department will suggest to you the different types of windows that will meet or exceed your requirements. All our products have been tested in United States. We can provide all the test at your request.

During a design process we can suggest how we can lower the cost of products. If you have flexibility in the design we might suggest changes in the design to accommodate different components at a lower cost with the same specifications and characteristics. If design can not be changed we will give you all available options. Our possibilities are endless. If you can draw and we can print on our 3d printer we can produce.

Under tight deadlines?

We are able to manufacture and deliver a large order within days. We are constantly involved in the commercial construction projects, we know how complicated and expensive these projects can be. Whether you are building a shopping center, corporate office, doctor’s office or any other type of commercial building, you will surely experience some kind of setback along the way. With EURO Windows and Doors MFG you can make sure your windows or doors will be fabricated and delivered on time.

EURO Windows and Doors fabricates the best quality affordable and durable commercial windows in NYC. We produce a wide variety of window replacement options including:

  • Aluminum storm windows
  • Aluminum impact resistant window frames for all your commercial windows replacement needs.

We have no projects that are alike. Windows that we produce have a critical role in the structure, design and integrity of a building. We fabricate windows that meet your design and performance criteria, and detail installation standards that will stand the test of time.

Manufacturing a New Type of Aluminum Windows

The new breed of aluminum window replacement, commercial windows we fabricate in NYC offer many different features that older window systems do not have, such as:

  • Various width sightlines
  • Excellent environmental properties
  • Architectural window systems
  • Glazing choices
  • Can incorporate curtain wall systems
  • Superior moisture management capabilities
  • Premium hardware at no extra cost
  • Optional tilt and slide hardware
  • Different window styles: fixed, project in, hopper or tilt and turn
  • Comes in more than 200 colors, such as 22 anodized finishes and two wood grains
  • Proven Eurogroove solution, a locking standard
  • Automatic saddle available

Top Rated New York Manufacturer

As a top rated New York manufacturer of the best quality aluminum windows, in addition to all the windows futures, we offer:

  • Wholesale prices
  • Highest quality components
  • Windows for both residential & commercial projects
  • No project is too small or too big. From small residential to large scale commercial projects
  • Free delivery in New York and New Jersey
  • Exceptional 20 years warranty on all the products we manufacture and install
  • We are certified and insured windows manufacturer
  • Best rated window and door manufacturer

 

EURO Windows and Doors MFG is among a few manufacturers of commercial windows that are made of a high quality aluminum and are tested to pass high performance standards to protect against air, water, temperature and structural integrity. Our new and replacement windows are at wholesale prices. We manufacture aluminum windows in large quantities and as a result we offer a substantial discounts.

Disclaimer: EURO Windows and Doors MFG will fabricate in accordance with dimensions and specifications shown on the customer approved drawings but will take no responsibility for failure of the customer to check drawings against job site conditions or for any other purpose. Special entrances cannot be scheduled for production until the approved detail, with the customer's signature, has been received, and all special hardware is in EURO Windows and Doors MFG. Changes made to any drawings after approval of details by customer may involve additional charges on the order.

Get a quote